Tile, Marble, Granite & Stone joints experience shrinkage stresses resulting in cracking & debonding. They are vulnerable to water seepage results in debonding of these claddings.

Zydex’s new Nano-Acrylic Copolymer technology ensure perfect water resistant bonding.

  • The ultimate adhesive for tiles, marble, granite and stones.
  • Provides strong molecular level reactive bonding of claddings
  • Absorbs shrinkage stresses
  • Sustains thermal cycling and produces a water-resistant bonding interface

  • There is no need to soak the tile in water before ZycoFix Application.
      • Brush / Spray the relevant grade of ZycoFix (Regular / Super / Ultra) on the reverse of the tile / stone / marble / granite. Let it dry for 15-30 minutes.
      • For highly porous stones, first apply one coat of Zydex Elastobar on the reverse side of the stone. Let it dry for 6-8 hours. Then apply Zycofix Ultra on the Elastobar treated surface.
      • For Granite, Marble, Stone and Large Tiles only (> 60 cm x 60 cm), apply ‘Ultra’ or ‘Super’ grade of ZycoFix,  on the plastered or concrete surface on which the cladding is to be fixed.
      • Next, within 1-2 hours of ZycoFix application, apply a mortar layer (1:2 Cement & Sand mix) on the ZycoFix treated plastered surface. (2-4 mm for smaller tiles < 60 cm x 60 cm, 3-5 mm for large tiles & 6-8 mm for large stones / granite / marble)
      • Immediately fix the Tiles / Stone / Granite / Marble on the wet mortar, allow a curing period of 28 days under normal weather conditions for best results.

      CAUTION: NEVER MIX ZYCOFIX WITH CEMENT

Leave a Reply

Your email address will not be published. Required fields are marked *